3/4 X 3/16 Hole X 3/8-24 Countersink 100 Degree Carbide Tipped (#679-d-2)

3/4 X 3/16 Hole X 3/8-24 Countersink 100 Degree Carbide Tipped (#679-d-2)

Sold by ksurplus

This seller has received 2,497 ratings (99.70% Positive)

Buy now for $22.00 USD

 

Item ships from National City CA USA

Browse all: Other Workholding

Similar Items

1" x 3/16 Hole x 3/8-24 Countersink 100 Degree Carbide Tipped (#685-D-2)
1 1/8" x 1/4 Hole x 7/16-20 Countersink 100 Degree Carbide Tipped (#686-D-2)
.942 x 7/16" Pilot / 3/8/24 Countersink 100 Degree (#682-D-2)
.832 x 3/8(.366) Pilot 3/8-24 Countersink 100 Degree (#678-D-2)
1" x 1/2" Pilot / 3/8/24 Countersink 100 Degree (#683-D-2)
1 1/4" x 1/4 Hole x 7/16-20 Countersink 100 Degree Carbide Tipped (#687-D-2)
NOGA NG1200 Rotodrive Countersink HSS Deburring Tool, Hole Chamfering ^
1/2" Square 10-32 Thread 3/8" High Carbide Tipped Jaw Pad MF654048
NEW MT3 CARBIDE TIPPED SINGLE POINT DEAD CENTER 60° MORSE TAP. HALF NOTCH -W540-
MT3 CARBIDE TIPPED HALF-NOTCHED DEAD CENTER (3900-6058)
1" x .494 Pilot / 7/16-20 Countersink 100 Degree (#684-50)
Morse Taper 5 MT5 Carbide Tipped Lathe Dead Center 60 Degree Point Milling
MT2 CARBIDE TIPPED HALF-NOTCHED DEAD CENTER (3900-6057)
3/4 x .494 Pilot / 7/16-20 Countersink 90 Degree (#680-100)
Fairlane CT-862 Carbide Tipped Gripper – Round – 3/4 in Dia x 1/2 in – Fine 1pc
MT1 CARBIDE TIPPED SINGLE POINT DEAD CENTER (3900-5056)
NEW MT2 CARBIDE TIPPED SINGLE POINT DEAD CENTER 60° MORSE TAP. HALF NOTCH -W538-
(5-Pk) Yardstore Countersink 100-Degree Number Size 5 1/2" Body 13009
Fairlane Carbide Tipped Angled Positioning Grippers 4 Point 10-32 Qty 5 CT-127-4
3900-5056 MT1 Carbide Tipped Single Point Dead Center

More from ksurplus

activate whohou store embed ebay listings into website
Teco Tee nuts 41460 3/8-16 (20 Pc In One Lot) (#611-NW) (124956122372)
6 5/16" Plastic Handwheel with Revolving and Foldable Handle(5/8" hole)(#98-C-3) (124165035358)
Teco 5/8 HD Hardened Flat Washers (25-pcs for25.00) (#647-LC33L) (122766724835)
3/4-20 4-Flute Spiral bottom Hand Tap (#696-H-2) (122940547071)
(1-lot of 20 pcs for 25.00) Tooling Balls 3/8" Ball - 3/16" Shank (#587-D-4) (122634582888)
All American #AHH450 Hold Down Clamp (4pc in Lot) #105-A-FLOOR (122119302146)
1 1/4" x 1/4 Hole x 7/16-20 Countersink 100 Degree Carbide Tipped (#687-D-2) (122861499092)
( Full Box 25-pcs ) Kakuta # HH151-B Hold Down Clamp for 65.00 (#121-B-1) (122072596407)
Destaco #530 Hold Down Clamp ( 2-pc for $25.00 ) (#484-C-2) (122100770924)
1-lot of 15 pcs of Carbide Inserts Kennametal #KC7235 (#450-63) (122310747193)
(1 lot 2pcs) Swagelok Connects B-QC6-B-4PM (#1447-K-2) (123889000444)
Teco T-Slot Nut 16 x 2.0 Metric Thread 20 mm size(4-pcs for 25.00) (#627-Cart) (122739668029)
11/16 - 32 Threadwell HS 4-Flute Hand Tap For Alum (#279-100) (124523616774)
5/8-18 (.008 undersized ) Winter HS 4-Flute Hand Tap (#280-100) (122102265945)
Teco T-Slot Nut #41422 3/4-10 Thread 1”-1/16" size (4-pcs) (#630-Cart) (122952477112)
Teco T-Slot Nut #41430- 1"-8 Thread 2"x2" (4-pcs $30.00) (#635-cart) (122739636097)
(1-lot of 20 pcs for 30.00 ) northwestern 1/2" Spring Plungers (#476-H-2) (122389965449)
All American AHV 650 (2pcs 1Lot) Hold Down Clamp (#1471-E-5) (123888931076)
Kakuta #HH250-2S Stainless Steel Hold Down Clamp( 4pc in Lot) (#119-B-1) (122071701536)
Teco T-Slot Nut #41423 - 7/8"-9 Thread 1" size (4-pcs for 30.00) (#631-Cart) (122739624498)
Teco T-Slot Nut #41429- 7/8"-9Thread 1 5/16 " t-sl sz (4-pcs $30.00)(#634-Cart) (122739634539)
1 "-27 Detroit 4-Flute Hand Tap (#273-100) (122102248140)
3/32" Varflex Electrical Insulating Sleeving 500' Roll (#621-A-1) (122711470955)
5/8" Varflex Electrical Insulating Sleeving 100' Roll (#448-A-1) (122308300507)
2 1/2 "-8 Hex Die Widell USA (#305-77) (122136091879)
Guhring USA #20 x 6" HS Drills (#652)(A-1-S) ( 50pc in lot) (122787233761)
Guhring 21 mm HSS Drill With #2 Tapered Shank (#506-82) (122447321839)
( 1- Box of 6--pcs ) Lufkin folding Woodrules 5/8" x 6' (#612-C-1) (122666910812)
7/64 Carbide High Performance Deep Hole Drill ( Harvey Tools) (#215-83) (122030878940)
(8-pcs for 35.00 ) All American - Sine Fixture Keys #171-03 (#488-D-1) (122401883077)
Kakuta HV400 Hold Down Clamp (2pcs) (#1472-D-1) (123888851463)
( 8-pcs for 35.00 ) All American #80-275 Push Pull Clamp (#113-B-2) (122075037768)
1 1/2 " 2- Flute End Mill 1 1/4" Shank HSS 8.087 Lead (#663-98) (122791265024)
.7450 " Reamer Hannibal #40010 6- Flute (#1274-51) (122527803404)
(7-pcs for 35.00 ) Jergens - Sine Fixture Keys #039-507 (#486-D-1) (125161480616)
(6-pcs for 35.00 ) All American - Sine Fixture Keys #171-02 (#487-D-1) (122401880545)
1" - 12 Hex Die GTD (#331-55) (122137519326)
1 1/8 - "8 Hex Die Widell #570564 (#328-55) (122137511477)
Helicoil 1"-8 Course Plug Tap USA (#545-D-4) (122538991381)
1 1/8 - 7 Hex Die Hanson (#329-55) (122137515170)
All American #282-24s 1"-8 Forged Eyebolt Stainless Steel (#254-D-3) (122079410708)
Helicoil 3/8”-16 Course Plug Tap USA (#545-D-4) (122538983238)
3/8"-24 Helicoil Fine Plug Tap USA (#547-J-3-A) (122539079979)
5 " Handwheel Steel Plated 3/8" Center Hole (#576-C-2) (122626051036)
1 1/8" x 1/4 Hole x 7/16-20 Countersink 100 Degree Carbide Tipped (#686-D-2) (122861497284)
P&W 3/4 -7/64 Right Hand ACME Thread Spiral Tap (#1345-38) (123859134782)
1" x .494 Pilot / 7/16-20 Countersink 100 Degree (#684-50) (122861523562)
1" x 1/2" Pilot / 3/8/24 Countersink 100 Degree (#683-D-2) (122861522037)
19/32-24 (minus .010 ) Plug 4-Flute HS Hand Tap (#557-11-D-1) (122568167194)
7/16-14 Left Hand Tapered 4-Flute HSS Tap (#551-I) (A-1-S) (122557778519)
.540 -24 Bottom 4-Flute HS Hand Tap (#557-3-D-1) (122568140697)
3/4 x .494 Pilot / 7/16-20 Countersink 90 Degree (#680-100) (122861516743)
Kakuta # HH 150 Hold Down Clamp (10pc in lot) (#111-A-4-L) (122075038291)
Enco 320-3657 5/16" x 7/8" Corner Round End Mill, Tin coat, HSS (#641-VID 2-1) (123654973921)
7/16 x 1/8" Counterbore With 1/4" shank (#672-69) (122839159148)
.832 x 3/8(.366) Pilot 3/8-24 Countersink 100 Degree (#678-D-2) (122861511958)
.942 x 7/16" Pilot / 3/8/24 Countersink 100 Degree (#682-D-2) (122861519084)
1/2-28 Plug HSS Hand Tap (#557-1-D-1) (122605340704)
( 1 lot of 10) Leviton 3A-250V On/Off Toggle Switch (#1455-E-2) (123888985731)
Kakuta HV452-11 Hold Down Clamp (#1474-I-2) (123888902454)
Helicoil 6-32 Course Plug Tap USA (#545-D-4) (125982700130)
8-36 Helicoil Fine Plug Tap USA (#547-J-3-A) (122539075420)
5/16"-24 Helicoil Fine Plug Tap USA (#547-J-3-A) (122539079049)
Keyence OP-94734 Cable Connector(1 LOT) 2pc (#1428-53) (123868633070)
Helicoil 1/2”-13 Course Plug Tap USA (#545-D-4) (122538985091)
1 7/8 - " 8 Hex Die Widell USA (#313-99) (122137123231)
1 5/8 - " 6 Hex Die Widell USA (#317-99) (122137137405)
11/16 - 20 HS 4 Flute Hand Tap #278-100 (#278-52) (122102259951)
Kakuta SL-150-SP Push/Pull Clamp Without Red Handle 4pcs (#57) (125156076022)
All American #80-300 Latch /Pull Action Clamp(4 in Lot) LCRS4-4 (122100778983)
5/8-24 x 12" 4-Flute Starter Pulley Tap (#550-D-2) (122547952716)
1 "-20 ( .011 ) undersized 6-Flute Hand Tap (#272-100) (122102245782)
10 " Stainless Steel Handwheel with handle (#86- nw) (124090390784)
Hannibal 1 3/16 +- .0005 carbide tip reamer #40038 8- Flute (#540-D-2) (122527990756)
(2-for 34.00 ) Kakuta SL-250- push pull clamps (#501-B-2) (122447289189)
6 5/16" Plastic Handwheel w/Solid Web and Revolving and Folding Handle (#99-C-2) (122952298364)
Helicoil 1” 1/2"- 6 Course Plug Tap USA (#545-D-4) (122538997284)
Stainless/Delrin SSWD-1 3/8-16, Leveling Feet (4pc) (#1469-G-3) (123888843865)
Destaco # 880 Pneumatic Hold Down Clamps (#61-D-3) (121935686968)
1 1/2 - " 12 Hex Die UB USA #90548 (#318-99) (123788198585)
Kakuta SL 110 Push/Pull Clamps 4pcs (#502-B-2) (125155993492)
Box of 12 pcs - of 8-30 2-Flute bottom carbon Hand Tap (#557-8-D-1) (122567212567)
Needle File Sets, 5 1/2"- 3x140mm( 150 pc)6pc in set(1 lot 25 sets) (#1626-J-1) (123982807873)
Drillco 18x2.0 Metric Plug Tap USA (#554-76) (122559556279)
.2105-56 Plug HSS Hand Tap (#557-6-D-1) (122605336804)
Schonbuch Sensor IBCT 1814-80 (#695-J-1) (122929885006)
( 4-pcs for 40.00 ) All American #80-242 Push / Pull Clamp (#572-D-1) (122615481280)
7 7/8" Plastic Handwheel w/Foldable Handle, 1 pc in lot (3/4 "hole)(#79-C-2) (122063152460)
Level-it- SSWD-0 Stainless/Delrin 1/4"-20 Leveling Mount (#1467-H-2)(1 lot 4pc) (123888985096)
Helicoil 3/4”-10 Course Plug Tap USA (#545-D-4) (122538988764)
3/4"-16 Helicoil Fine Plug Tap USA (#547-J-3-B) (122539088449)
Kakuta HV352-TL Hold Down Clamps(4pcs In 1Lot) (#1473-NW2BTOP) (123888953786)
Box of 12 pcs - of .194-40 2-Flute HSS Plug stub Tap (#557-7-D-1) (122567217815)
Fast-cut 1 1/2" 2- Flute End Mill 1 1/4" Shank (#219-76) (122048319176)
Baldor 1.5 HP Motor 208-240/480 Long Shank (#693-J-1) (122909901169)
Oriental Reversible Motor 5RK40GNA (#692-D-3) (122909721099)
5/8"- 18 Helicoil Fine Plug Tap USA (#547-J-3-B) (122539086866)
1 3/8 - "8 Hex Die Widell #576832 (#323-55) (122137503059)
1 3/16 - 14 Plug Tap 4 Flute H.S. (#558-I) (A-1-S) (125210179128)
activate whohou store embed ebay listings into website

Whohou Marketplace | Terms of Use | Privacy Policy | Contact Us | Follow us on Facebook, Instagram, and Twitter | Affiliate Program | Affiliate Portal