Dana 44 Complete Shim Kit Replacement

Sold by superior.auto.parts

This seller has received 19,436 ratings
(98.90% Positive)

Item ships from Superior WI USA

Buy now for $32.70

Buy It Now

Browse more from superior.auto.parts

Yukon Hardcore Diff Cover Magnetic Fill/ Drain Plug, 1/2"-14 NPT $5.41
Pinion nut, M20/35, D30/44 JK front, Ford 10.25"/10.5"/some 9.75" 7/8-20 thread $7.20
USA Standard Pinion installation kit for Chrysler 9.25" rear $67.52
Pinion depth shims for Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25 $13.35
Chrome Cover for 8.6", 8.5" and 8.2" GM rear $41.36
Spartan Locker for Dana 60, 35 spline axles, includes heavy-duty cross pin shaft $542.00
Crush sleeve eliminator kit for Ford 9 $41.80
10.5" GM 14 bolt truck crush sleeve $6.75
Pinion nut $6.75
Replacement crush sleeve for Dana 60 $6.75
Dana 30 Side Gear Thrust Washer $6.75
Crush Sleeve $6.75
Outer stub axle spindle plastic thrust washer for Dana 30 & 44 $6.75
7.5 & 7.625 Standard Open Pinion gear Thrust Washer. $6.75
Toyota 7.5 pinion nut $6.75
Replacement pinion Preload Shims for Dana 60, Dana 61 & Dana 70-U $12.30
GM 8.2" Crush Sleeve $12.30
Spartan Locker for Toyota 7.5" IFS, 27 spline, with heavy-duty cross pin shaft $412.00
Steel cover for GM 8.0 $42.76
USA Standard Transfer Case Shift Motor GM 8.25" IFS & 9.25" IFS Electric $45.82
Yukon Hardcore Nodular Iron Cover for Chrysler 9.25 Rear Differential $137.51
Yukon Hardcore Diff Cover for AAM 9.25 Front Differential $137.51
Toyota 7.5" Crush Sleeve $10.40
Replacement cross pin shaft for Dana 44, Standard Open $10.60
Standard open cross pin shaft (.750") for Ford 8", 8.8", 9" and Model 20. $10.60
Spartan Locker for Toyota 9.5" Land Cruiser, 30 spline, with HD cross pin shaft $419.00
Spartan Locker for Chrysler 8.25", 27 spline, with heavy-duty cross pin shaft $504.00
Spartan Locker for Chrysler 8.25", 29 Spline, with Heavy-Duty Cross Pin Shaft $504.00
Positraction pinion gear thrust washer w/step-lip inside, GM 12P/12T, Eatons $9.76
Crush Sleeve $7.86
GM 14T 10.5" & AAM 11.5" AXLE FLANGE GASKET $7.86
Yukon Dropout Assembly, Chrysler 8.75 Diff 489 Case w/Sure-Grip LSD, 3.55 Ratio $1,094.80
Yukon Hardcore Nodular Iron Cover for Ford 10.5" Rear Differential $162.51
Yukon Might Seal Inner Axle Seal for Jeep JL Dana 44 M210 $31.13
Yukon Hardcore Diff Covers for 11.5 & 11.8 GM, Dodge, Ram differentials $156.71
Mini spool for Suzuki Samurai $118.19
Replacement redi-sleeve yoke saver, 8.75" c, 9.25" c, Dana 60/61/70/70U/70HD $17.70
Yukon Pinion Seal for Jeep Wrangler JL Front D30/186 MM $17.70
Pinion nut $5.25
Crush Sleeve for GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan M226 Rear $5.25
Pinion gear thrust washer, D60/Standard Open/TracLoc /8.75" Chrysler /D70 2PC $5.25
Standard Open side gear and thrust washer for GM 12 bolt car and truck. $5.25
Spartan Locker for Toyota V6 applications, 30 spline axles, w/stock side gears $352.00
Crush sleeve $4.50
Pinion gear and thrust washer for 8" and 9" Ford, Model 20, and 7.25" Chrysler. $4.50
Cover bolt for Ford 7.5", 8.8" & 9.75 $4.50
Yukon Rear Nodular Iron Cover for 8.5" GM with 8mm Cover Bolts $152.21
Crush sleeve eliminator kit for GM 12 bolt car $31.80
Yukon Bench Buddy Dropout Differential Case Holding Fixture $255.20
Toyota T100 & Tacoma crush sleeve. $10.99
Spartan Locker Spring & Pin Kit for SML D30, D44, M20, M35, TITAN, T7.5 & T8 $16.18
Crush sleeve for 2011 & up Ford 9.75, 1.875" Tall $27.60
Replacement crush sleeve for Dana 30 short (Jeep TJ) $7.50
Yukon Replacement Front Standard Open Carrier Case for Jeep JK D30 $103.97
USA Standard Pinion installation kit for Rubicon JK 44 front $66.03
Chrome Cover for GM 12 bolt truck $34.56
10.25" TracLoc (Ford Case) Paper/Composite Lined Clutch Set $159.02
10.5" Ford '11 & up pinion nut, M30-1.0 RH thread $13.00
Crush sleeve eliminator kit for GM 10.5" 14 bolt truck. $75.90
Dana 44 And Chrysler 9.25" Traclloc Clutch Kit replacement $81.10
Yukon standard open carrier case, GM 10.5" 14 bolt truck, 4.10 & down $296.00
Standard Open pinion gear thrust washer for GM 12P and 12T. $8.20
Crush Sleeve, Toy V6/Landcruiser Rev Front & Tacoma/T100 w/fact locker, 1.820" $9.09
O-ring for 9" Ford $9.09
Toyota Landcruiser pinion nut, coarse spline $9.09
GM 12 bolt passenger car crush sleeve $9.09
Yukon Yoke 1310 Conversion Yoke for Jeep JK NP241 Transfer Case, 32 Spline $86.18
Chrome Cover for 7.5" Ford $26.46
Spartan Helical LSD worm gear limited slip positraction for D30, front - 10383 $304.00
Standard Open and positraction cross pin shaft for GM 12T, 12P, and 55T. $14.01
Yukon Dura Grip 400-lb spring kit w/preload plates, GM 8.5/12P/12T, Ford 8.8 $63.91
Yukon steel spool for GM 8.5" & 8.6" with 30 spline axles $269.95
Yukon Hardcore Diff Cover for Dana 30, Purple $161.81
Yukon Hardcore Nodular Iron Cover for 8.8" Ford $147.81
Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25 $29.34
Crush sleeve eliminator kit for GM 7.5" & 8.2 $29.34
Steel Differential Cover for Nissan M226 Rear $109.36
Spartan Locker for Ford 9", 28 or 31 spline axles $364.00
Chrome Cover for 7.5" GM $40.06
Steel cover for Ford 8.8 $55.71
Seal housing for Dana 44, Zip locker, with o-rings $48.10
Seal housing for Dana 30, Model 35 ZIP locker $48.10
Yukon Dropout Assembly, Chrysler 8.75 Diff 489 Case w/Sure-Grip LSD, 3.73 Ratio $971.92
Finned aluminum cover for Ford 10.5", '08 & Up $101.91
Yukon GM & Dodge 11.5" Rear Differential Cover Gasket, Rubber $21.39
Yukon Rear Minimum Installation Kit for Jeep Warngler JL Dana 44 Rear $91.41
Yukon Black Baseball Hat with White Embroidered Logo $17.14
Yukon Rear Pinion Installation Kit for Jeep Wrangler JL Dana 44 $146.51
7.5" Toyota Crush Sleeve Eliminator Kit $37.28
Ford 8" & 9" TracLoc Ring Gear bolt $3.75
Ring gear bolt $3.75
USA Standard Gear Open Spider Gear Rear for Jeep JK Non-Rubicon 30-Spl D44 $175.54
Suzuki Samurai crush sleeve $12.78
Yukon replacement standard open carrier case for Dana 70, 4.10 & down $216.70
Yukon Pinion Installation Kit, Jeep Wrangler JL Front Dana 44, w/out Axle Seals $159.31
Pinion nut for Chrysler 300, Charger, Magnum. $37.10
Yukon Bottle Opener $4.89
Chrome Cover for 8.5" GM front $25.81
Pinion gear and thrust washer for 9.75" Ford. $15.24
Spartan Locker heavy-duty repalcement cross pin shaft, Dana 44HD differential $29.92