Robb-jack Str-404-32-c 1-in Dia 4-flute End Mill, 2.5-in Loc, 1-in Shank, 5-in

Robb-jack Str-404-32-c 1-in Dia 4-flute End Mill, 2.5-in Loc, 1-in Shank, 5-in

Sold by 608scorpio159

This seller has received 18,929 ratings (99.30% Positive)

Buy now for $680.00 USD

 

Item ships from Winona MN USA

Browse all: Finishing End Mills

Similar Items

SGS 36468 Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC 4 Flute, Solid Carbide
HELICAL Carbide End Mill 1/2 dia. 5 flute x 1-5/8" LOC Sharp 4" OAL
HELICAL Carbide End Mill 1/2 dia. 5 flute x 1-5/8" LOC 0.030"CR 4" OAL
DATA FLUTE MHL50250C11 1/4 DIA 1 1/4 LOC 4" OAL 5 FL CARBIDE END MILL EDP 39918
7/8" DIAMETER, 5" LOC, 4 FLUTE, HSS END MILL 7-1/4" OAL, 7/8" SHANK DIA PUTNAM
1” DIAMETER 2” LOC 5 FLUTE, HSS-Co END MILL 4-1/2” OAL, 1” SHANK DIA OSG
NEW OSG 5/8" dia. 1-3/8" LOC 1/2" SHANK 4-FLUTE SQAURE END MILL
HELICAL Carbide End Mill 1/2 dia. 2 flute 5/8" LOC 2-1/2 Reach 4-1/4" OAL
Square End Mill: 3/8" Dia, 7/8" LOC, 4 Flute, Solid Carbide
WELDON 1" Dia X 3/4" Shank X 1-1/2" LOC X 3-3/4" OAL HSS End Mill 2 Flute USA
HELICAL New Carbide Ball End Mill 1/2 dia.4 flute .625" LOC 2-3/4 Reach 5" OAL
Use HELICAL Carbide End Mill 3/4 dia. 3 flute x 2-1/4" LOC Sharp-5" OAL
1.75" DIAMETER, 1-1/2" LOC, 2 FLUTE, HSS-CO END MILL 4" OAL 1-1/4" SHANK DIA OSG
1 pc. 3/4” X 5/8 SHANK 2 FLUTE PCD DIAMOND TIPPED END MILL NCC. USA(loc stk)
QUINCO 5/8 HS END MILL, 5/8" SHANK DIA, 4" LOC, 6-1/8" OAL, 4 FLUTE
Guhring Square End Mill 5/8" Dia x 1-1/4" LOC x 5/8" Shank x 3-1/2" OAL 4 Flute
5/8" Dia 1-3/4" LOC 4FLUTE CARBIDE END MILL FOR ALL STEEL USA SELL
DATA FLUTE New Carbide End Mill - 3/4 DIA, 3/4 SHANK, 3 OAL, 5 FL, MHST50750C1
27392 7 Flute, Corner Radius End Mill, Aplus, Cut Dia. 3/4, LOC 2-1/4, OAL 5
NEW KENNAMETAL Ball End Mill 1/4 Dia, 0.750″ LOC, 4 Flute, Solid Carbide

More from 608scorpio159

activate whohou store embed ebay listings into website
WELDON 1/2" Dia. 3-Flute 1-1/4" Length 37 deg Coating = ZrN Drive Style (175363177908)
5/8" AlTiN Monster Tool USA 2 Flute Carbide Drill Mill 60Deg Point Angle (174244658290)
1/2" Diameter x 90Deg Drill Point End Mill(Drill/Mill) 2 Flute TiCN Carbide (175723728499)
NIAGARA HSCO 3/4" x 3/4 x 3 x 5-1/4 N53887 Roughing End Mill NEW 1pc (176359337560)
Niagara Cutter 3/16" x 3/16" x 5/16" Carbide 3 Flute Uncoated, Single End-Square (175804124910)
5/32" x 9/16" x 2" Carbide 2 Flute Single End-Square Center Cut End Mill (175104386526)
#6-32 3 Flute H3 Screw Thread Insert (STI) Modified Tap (186091534036)
#6-32 3 Flute H3 Screw Thread Insert (STI) Modified Tap (186187335941)
Uncoated Sng End-Square Center Cut End Mill 1/4" x 5/8" x 2-7/16" HSS 30° (185848057846)
OSG 404-3125-BN11 404BN Center Cutting Regular Length Single End Standard ball (186029174240)
macedonia 7/16" x 1" x 4-1/8" HSS 4 Flute Double End-Square Center Cut End Mill (175176064204)
3/16" 4FL Monster Tool USA FUSION HP Variable Helix Carbide End Mill (185767460370)
5/64" x 0.1400" x 2-1/2" OAL Carbide 32°/48° Helix 3 Flute End Mill (185225433938)
Widia® 1/8x1/8x1/4x1-1/2 TiAlN Square End 4FL Center Cutting HP Carbide End Mill (175564483241)
3/16" x 1/2" x 3-1/4" HSS 30° Helix 4 Flute Double End-Square Center Cut End Mil (175134264011)
0.0270" x 0.0810" x 1-1/2" OAL Carbide 30° Helix 4 Flute Bright Finish End Mill (184972679851)
Double End-Square Center Cut End Mill 1/4" x 1/2" x 3-1/8" Qty:2 (176376694052)
Element CARBIDE END MILL 3 FLUTE EXTENDED FLUTE 3/8 Diax1"LOCx21/2 OAL (175034810657)
Double End-Square Center Cut End Mill 3/8" x 9/16" x 3-1/8" Qty: 2 (176376702176)
monster tool 221-001024 Carbide End Mill, 9/64In, 2FL, Single, 2In. LOT OF 2 (184476190879)
2pcs 0.059" 2 Flute Square End Monster Tool USA Carbide End Mill, AlTiN (174244743116)
Uncoated Single End 30° Hlx Finishing SQ EM 3/8" x 1" x 2-1/2" Carbide 4 Fl (185848149363)
Double End-Square Center Cut End Mill 1/2" x 1-3/16" x 3-3/4" (186440681958)
OSG® 9/32" x 11/16" x 2-1/2" OAL Vanadium HSS 30° Helix 4 Flute End Mill (175565592035)
FMT® Double End-Square Center Cut End Mill 1/2" x 1-3/16" x 3-3/4" OAL HSS 30° (176223037878)
OSG® 5/32" x 7/16" x 2-3/8" OAL Vanadium HSS 30° Helix 4 Flute End Mill (185729695259)
Kyocera SGS Solid Carbide Square End Mill Single End Series 3 1/8" 2 Flute 39315 (185929967312)
C430-0.188-D3-S.0-Z4 TIALN NIAGARA SOLID CARBIDE GP EDP number N85590 (185041649413)
Kennametal 1/2" 4 Flute Carbide Endmill HPHV500S4063R060 KCPM15 (176401421403)
Harvey Tool 30030-C3 60° Point Angle 1/4" x 0.2160" x 2-1/2" AlTiN (186433819369)
OSG 3/8", 1" LOC, 3/8" Shank Diam, 2-1/2" OAL, 4 Flute, Solid Carbide Square ... (175853721340)
FMT® 1/8" x 3/8" x 2-5/16" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End (175915915903)
FMT® 3/16" x 1/2" x 2-3/8" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End (175915825326)
FMT® 3/16" x 1/2" x 2-3/8" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End (185728833622)
FMT® 5/16" x 3/4" x 2-1/2" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End (185728836711)
FMT® 1/8" x 3/8" x 2-5/16" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End (175564748802)
2pcs 0.033" 4 Flute Square End Monster Tool USA Carbide End Mill, AlTiN (184244809743)
1/4" x 1/2" x 3-1/8" OAL N.242 Carbide 2 Flute YG Special 30° Finish Ball Nose (185225685810)
Flowdrill 210720 7/16-18 BITS (7.2MM SHORT/FLAT) Shank Dia. 8MM (186443648885)
Flowdrill 210570 3/4-20 BITS (5.7MM SHORT/FLAT) Shank Dia. 6MM (186443807565)
1/2" 4 FLUTE SINGLE END SOLID CARBIDE BALL NOSE END MILL OSG 404-5000-BN USA (186208247682)
OSG® 5/8" x 1-5/8" x 3-3/4" Vanadium Helix 4 Flute Center Cut End Mill (175608980029)
(2) OSG® 1/8" x 3/8" x 2-5/16" OAL Vanadium HSS 30° Helix 4 Flute End Mill (185729692689)
LMT.Onsrud 1/4" 2 Flute Carbide Ballnose Endmill 1/4" Shank 65-220B (175936694390)
Niagara Cutter S545R-0.250-D3-R030.0-Z5 S545R Carbide Radius End Mill, AlTiN (175607091221)
OSG VG434-5000 0.03" Corner Rad, 1/2" Mill, 5/8" LOC, 2-1/2"OAL, 4FL End mill (176355805625)
OSG® 9/16" x 1-3/8" x 3-3/4" OAL Vanadium HSS 30° Helix 4 Flute End Mill (175565596313)
(3) Widia® 1/8x1/8x1/4x1-1/2 TiAlN Square End 4FL Center Cutting HP Carbide End (175564483966)
NIAGARA 9/32 2 FL SOLID CARBIDE END MILL, EDP 85277, NEW (185930240679)
C430-0.375-D4-S.0-Z4 TIALN NIAGARA SOLID CARBIDE GP EDP number N55688 (175760391946)
Niagara Cutter Carb S335-0.500-D3-R030.3-Z3 ALTIN (176355760728)
5/8" Dia. X 1-5/8" LOC 4 Flute Uncoated End MillL (185274697575)
KENNAMETAL Ball End Mill: 7/16" Dia, 1" LOC, 2 Flute, Solid Carbide 5876761 (176407392268)
Carbide Ballnose 6" OAL 3/4" shank 4 flute 2" cut (185769393339)
Flowdrill 210490 #12-24 BITS (4.9MM SHORT/ FLAT) Shank Dia. 6MM (176379618816)
OSG USA Inc 404-6250-BN Ball End Mill (186208257296)
FLOWDRILL M6 - Ø 5.4 SHORT FLAT 210540 (186443799652)
FLOWDRILL UNC 3/8 - Ø 8.7 SHORT FLAT 210870 (176379517801)
Flowdrill 210450 M5 x 0.8 BITS (4.5MM SHORT/FLAT) Shank Dia. 6MM (176379629076)
SGS 1/4" x 1/4" x 2.5" TiAIN Solid Car 4 Flute .02" Cor. Rad Single End Mill 2pc (185729766707)
OSG® 15/32" x 1-1/4" x 3 Vanadium Helix 4 Flute Center Cut End Mill QTY 2 (185772345407)
2" x 2" x 4-1/2" HSS 8 Flute Single End-Square Non-Center Cut End Mill (174795340836)
(2) YG-1® - 1/2" x 1/2" x 1" x 3-1/4" OAL 6 Flute YG Special 45° Long Square End (185622482845)
(3) OSG® 1/8" x 3/8" x 2-5/16" OAL Vanadium HSS 30° Helix 4 Flute End Mill (175565586579)
(3) OSG® 9/32" x 11/16" x 2-1/2" OAL Vanadium HSS 30° Helix 4 Flute End Mill (185729700224)
(3) OSG® 5/32" x 7/16" x 2-3/8" OAL Vanadium HSS 30° Helix 4 Flute End Mill (175565589492)
Melin Tool 1/2" Diam, 1" LOC, 4 Flute, 90° Point Angle, Solid Carbide Drill Mill (175761935171)
Niagara Solid Carbide Square End Mill Cutter N61383 5/8x5/8x1-5/8x3-1/2 (176594421593)
Single End-Square Center Cut End Mill 1/2" x 2" x 4" Carbide 37° Helix (175709318504)
1-1/2" x 2" x 4-1/2" OAL HSS 30° Helix 4 Flute Uncoated Finish Single End-Square (185826031030)
(4) YG-1® - 1/2" x 1/2" x 1" x 3-1/4" OAL 6 Flute YG Special 45° Long Square End (185622486935)
OSG® 1/2" x 3" OAL HSS 4 Flute Ball Nose End Mill Qty 2 (175609001935)
OSG® 5/8" x 1-5/8" x 3-3/4" OA Vanadium Helix 4 Flute Center Cut End Mill Qty 3 (175608986882)
1/2" 2 Flute Ball Nose DE Monster Carbide End Mill, AlTiN USA, Plain Shank (174283146746)
SECO 1/2" x 1/2" x 1-1/4" x 3" OAL 4F SE CARBIDE STABILIZER™-GP STS430 TIALN (175763677205)
OSG Square End Mill: Non-Center Cutting, 6 Flutes, 1 1/4" Milling Dia. 5576100 (175605202025)
Niagara cutter 5/8" x 2" x 6" OAL 4F SE 30 CARBIDE END MILL C430 TIALN (175761713919)
OSG® 7/8" x 1-7/8" x 4" Cobalt HSS 30° Helix 3 Flute Square Center Cut End Mill (175608971579)
(3) YG-1® - 1/2" x 1/2" x 1" x 3-1/4" OAL 6 Flute YG Special 45° Long Square End (185622485440)
OSG® 5/8" x 1-5/8" x 3-3/4" OA Vanadium Helix 4 Flute Center Cut End Mill Qty 2 (185772352581)
OSG® 1/2" x 3" OAL HSS 4 Flute Ball Nose End Mill Qty 3 (175609002864)
HTC 1 Roughing “hog”-turbo Mill-4 Flute-single End-square-uncoated – 300-4105 (175605330416)
Flowdrill 210530 M6x 1.0 BITS (5.3MM SHORT/FLAT) Shank Dia. 6MM (186443813823)
OSG® 5/8" x 1-5/8" x 3-3/4" Vanadium Helix 4 Flute Center Cut End Mill Qty 2 (185772350237)
OSG® 15/32" x 1-1/4" x 3 Vanadium Helix 4 Flute Center Cut End Mill QTY 3 (175608977877)
OSG® 7/8" x 1-7/8" x 4" Cobalt HSS 30° Helix 3 Flute Center Cut End Mill QTY 2 (185772341101)
activate whohou store embed ebay listings into website

Whohou Marketplace | Terms of Use | Privacy Policy | Contact Us | Follow us on Facebook, Instagram, and Twitter | Affiliate Program | Affiliate Portal