Harvey 3/16" 2-flute Carbide Ball Nose End Mill, 1.5" Tapered Length, 1/4" Shk.

Harvey 3/16" 2-flute Carbide Ball Nose End Mill, 1.5" Tapered Length, 1/4" Shk.

Sold by david010967

This seller has received 2,378 ratings (100.00% Positive)

Buy now for $25.00 USD

 

Item ships from Arlington TX USA

Browse all: Finishing End Mills

Similar Items

5 PCS 1/8" 4 Flute 1-1/2" Overall Length Ball Nose Carbide End Mill
5 PCS 1/8" 4 Flute 1-1/2" Overall Length Ball Nose Carbide End Mill
Findmal 5 PCS 1/8" 4 Flute 1-1/2" Overall Length Ball Nose Carbide End Mill
New 5 Pcs 1/8" 4 Flute Ball Nose Carbide End Mill 1-1/2" Overall Length
sisona 3/8" Carbide Roughing End Mill - 4 Flute - 3/8'' Shk Dia 2-1/2'' Oal -...
5Pcs Carbide End Mill 1/4" 4 Flute Ball Nose 2-1/2" Overall Length -TIALN COATE
LaHabra Tool 1/4" x 1/4 x 3/4 x 2-1/2 Solid Carbide Ball Nose End Mill 4 Flute
5 PCS 1/4" 4 Flute Ball Nose Carbide End Mill 3/4" LOC 2-1/2" Overall Length
5 PCS 1/8" 4 Flute 1-1/2" Overall Length Ball Nose Carbide End Mill
4 Flute 25/64 x 7/16 x 1 x 2-3/4 Ball Nose End Mill Solid Carbide Un-Coated
HTC TOOL SOLID CARBIDE 1/2” BALL NOSE END MILL PLUS ALTIN 4 FLUTE (see all pics)
1/16" 4 FLUTE SE CARBIDE BALL NOSE END MILL 3/16" LOC X 1-1/2" OSG 404-0625-BN
Harvey Tool Square End Mill: 1/8" Dia, 3/16" LOC, 4 Flute, Solid Carbide 1-1/2"
3/16" BALL Nose END MILL 4 Flute Solid Carbide OAL 2" Made In USA HTC 135-4187
New 5PCS 1/8" 4 Flute Ball Nose Carbide End Mill 1-1/2" Overall Length
5/32" 4 FLUTE SE CARBIDE BALL NOSE END MILL 3/16" LOC X 1-1/2" OSG 404-1562-BN
New 5 pcs 1/8 Inch 4 Flute Ball Nose Carbide End Mill 1-1/2 Inch Overall Length
3/32" 4 FLUTE SE CARBIDE BALL NOSE END MILL 5/16" LOC X 1-1/2" OSG 404-0938-BN
Harvey Tool Carbide end mill 3/16 dia. X Sharp 3 Flute 0.562"LOC 2" OAL
10 NEW! Kyocera .0156" Carbide Ball Nose Endmill 4FL 1/8"SHK 1.5"OAL

More from david010967

activate whohou store embed ebay listings into website
KENNAMETAL 1/2"DIA. X 5/8"FL X 4 OAL, .467" NECK DIA. EXTENDED CARBIDE END MILL (185728913085)
HARVEY 49312-C3 .187" X .281" LOC X 2.812" RCH. CARBIDE BALL NOSE END MILL (186718610130)
3/4" X 4" OAL, 1.5" LOC, 3-FLUTE CARBIDE ENDMILL, .125" R. (186638372750)
GARR .300" X .750" LOC X 4" OAL, .375" SHANK 2-FLUTE CARBIDE END MILL (186750542664)
GARR 3/16" X 1" LOC X 3" OAL , 3/16" SHANK, 2-FLUTE CARBIDE END MILL, 3 Pcs (186739569988)
.400" X 1" LOC X 5" OAL, 1/2" SHANK .372"NCK, 2.7" RCH 3-FLUTE CARBIDE ENDMILL (186750588834)
AB .125" W X 1.75" DIA. X 1/2" SHK 4-FL CARBIDE TIPPED SLOTTING CUTTER, (186595983926)
GUELPH CUTTING TOOL 5/16" X 3" FL CARBIDE COOLANT ENDMILL FOR PLASTIC (186140913277)
4.0MM .157" X .400" LOC X 2-1/4" OAL,6MM SHANK 2-FLUTE CARBIDE END MILL, 4 Pcs (186727743199)
GW SCHULTZ .2362" X .200" LOC" X 3.5" OAL CARBIDE 2-FLUTE END MILL, 3 PCS (186720281384)
.259" DIA. X .900" LOC X 4" OAL X 3/8" SHANK, 2-FLUTE CARBIDE END MILL (186718776742)
GW 1/2" DIA. X 1" LOC X 3" OAL X .05 R 3-FLUTE CARBIDE END MILL, 2 PCS (186718704534)
GARR 1/4" X 1.375"LOC X 1/4" SHK. X 3" OAL 3-FLUTE CARBIDE END MILL, 3 PCS (186718796172)
GARR 1/2" X 1.25" LOC X 3.5" OAL, 1/2" SHANK 2-FLUTE CARBIDE END MILL, 2 Pcs (186707701214)
1/4" X 1-1/8" LOC X 1/4" SHK X 3" OAL, .062" R, 3-FLUTE CARBIDE ENDMILL, 3 PCS (186720291829)
3.5MM .137" X 5/16" LOC X 2-1/4" OAL,6MM SHANK 2-FLUTE CARBIDE END MILL, 5 Pcs (186724658467)
GARR .350" X 1.25" LOC X 4" OAL, 1/2" SHANK 2-FLUTE CARBIDE END MILL, 3 Pcs (186709826550)
AB .125" W X 2.375" DIA. X 1/2" SHK 4-FL CARBIDE TIPPED SLOTTING CUTTER, (186595996031)
NIAGARA 3/16 X 3/16 X 9/16 X 2 3-FLUTE CARBIDE END MILL, 3 PCS (186717525469)
HARVEY TOOL .250" 4-FLUTE TAPER REACH CARBIDE END MILL 3/8" SHANK , 4" OAL (184113764819)
GARR 12MM DIA. X 32MM LOC X 75 MM OAL 3-FLUTE CARBIDE END MILL, 2 PCS (186718714590)
12 MM X 32MM LOC X 75MM OAL 3-FLUTE CARBIDE END MILLING, 2 PCS (186651695461)
OSG 3/4" X 1.50 LOC X 4" OAL, 2FL CARBIDE CHAMFER MILL, 130° INCLUDED ANGLE (186831348934)
3/4" X 70° INCLUDED ANGLE X 1.5" LOC, 2-FLUTE CARBIDE CHAMFER MILL (186650363292)
PCT 3/8" X 1" LOC X 5/8" SHANK X 7.750" OAL, L.H. BALL NOSE CARBIDE END MILL (185802715462)
1/4" X .5" LOC X 2.5"OL 4-FL CARBIDE RIGHT HAND CUT / LEFT HAND SPIRAL END MILL (186663407217)
.025" DIA. X .100" LOC X 1.5" OAL X .125 "SHK 4-FLUTE CARBIDE END MILL, 9 PCS (186718690416)
OSG 3/4" X 1.240 LOC X 4" OAL, .433" NECK X .900" L 3FL CARBIDE END MILL (186831339989)
GARR 3/8" X 2" LOC X 5" OAL, .375" SHANK 2-FLUTE CARBIDE END MILL (186750545308)
SCIENTIFIC TM583 5/8" DIA. X 1.0MM THREAD PITCH CARBIDE THD. MILL, .400" LOC (186315495491)
.5" X .200" LOC X .26"NECK X 1.95" RCH 3-FLUTE CARBIDE KEYSEAT MILLING CUTTER (186750565317)
.250" X 3/8" LOC X 4" OAL , 1/4" SHANK, 3-FLUTE CARBIDE END MILL, 2 PCS (186738499773)
GW 1/2" X .200" W X .256" NCK DIA. X 4" OAL, 3-FLUTE CARBIDE KEYSEAT CUTTER (186707785512)
GW SCHULTZ .054" X .300" LOC X 2.5 " OAL X 1/4" SHANK CARBIDE END MILL, 4 PCS (186718784414)
PCT 1/4" X 3/4" LOC X 3/4" SHANK X 6" OAL, 1/4"x 5° BALL NOSE CARBIDE END MILL (185802688823)
4.0MM .157" X 5/16" LOC X 2" OAL, .157 SHANK 2-FLUTE CARBIDE END MILL, 5 Pcs (186727733943)
.302" X 1.05" LOC X 3" OAL, 3/8" SHANK, 2-FLUTE CARBIDE END MILL (186750581526)
.365" DIA. X 1" LOC X 3/8" SHK. X 7.5 "OAL, 6" REACH,CARBIDE 3-FLUTE END MILL (186632796689)
.100" DIA. X .200" LOC X 4" OAL X 1/4" SHANK, 3-FLUTE CARBIDE END MILL, 2 PCS (186718757920)
.093" X .400" LOC X 6" OAL X 3/8" SHANK CARBIDE 3-FLUTE END MILL (186739522117)
M.A.FORD 5/32 X 5/16 X 2 X 3/16 SHANK 2-FLUTE CARBIDE END MILL, 5 PCS (186718619221)
.25" X .375" LOC X .198"NECK X 1 REACH, 1/4" SHANK, 2-FLUTE CARBIDE ENDMILL (186750596166)
ROBBJACK 3/32" X 5/32" LOC X 2.5"OL CARBIDE DOUBLE ENDMILL, 2 PCS (186717286867)
GARR .230" X .80" LOC X 4" OAL, 1/2" SHANK, 4-FLUTE CARBIDE END MILL, 2 PCS (186707730810)
.242" X .62" LOC X 4" OAL, 1/4" SHANK, 2-FLUTE CARBIDE END MILL (186750574624)
GW SCHULTZ .166" X .750" LC X 6" OAL X 1/2" SHANK, 3-FLUTE CARBIDE END MILL (186749221524)
GARR .330" X 1" LOC X 4" OAL , 3/8" SHANK, 4-FLUTE CARBIDE END MILL (186739560750)
GW .440" X .750" LOC X 7.5" OAL, 1/2" SHANK, 2-FLUTE CARBIDE END MILL (186707723288)
.312" X .5" LOC X .286"NECK X 1.75" REACH, 3/8" SHANK, 3-FLUTE CARBIDE ENDMILL (186750601754)
1/2" X 1.5" LOC X 4.25" OAL, 1/2" SHANK, 5/32" R. 2-FLUTE CARBIDE END MILL (186750554337)
3/8" DIA. X 3/4" LOC X 2-1/2"OAL, .100" RA. 4-FL CARBIDE END MILL, 2 PCS (186637758093)
3/8" DIA. X .375" W X .192" NECK DIA. X 2.25" REACH,CARBIDE KEYWAY CUTTER, (186638123561)
.203" X .625" LOC X 6" OAL X 1/4" SHANK, 2-FLUTE CARBIDE END MILL (186727755993)
5/16" X 1.5" LOC X 3" OAL 2-FL CARBIDE RIGHT HAND CUT / LEFT HAND HELIX END MILL (186646459062)
3/8" DIA. X .385" LOC X 4" OAL X 3/8" SHANK, .060 R. 2-FLUTE CARBIDE END MILL (186718771459)
DATA FLUTE 5/16" DIA. X 1.25" LOC X 4" OAL 5-FLUTE CARBIDE END MILL, 2.3" REACH (186689369111)
GW .313" X .50" LOC X 6" OAL, 3/8" SHANK, 3-FLUTE CARBIDE END MILL (186707709918)
.250" X 3/8" LOC X 4" OAL , 1/4" SHANK, .197" NECK 2-FLUTE CARBIDE END MILL, (186738556727)
GARR .125" X 1/4" LOC X 4" OAL , 1/4" SHANK, 3-FLUTE CARBIDE END MILL (186739545293)
1/4" X 1/4" LOC X 3" OAL, 1/4" SHANK, 1/16" R. 3-FLUTE CARBIDE END MILL (186727751965)
.250" X .5" LOC X .300"NECK X .5" L, 3/8" SHANK, 3-FLUTE CARBIDE ENDMILL (186750626768)
GW .242" DIA. X .700" LOC X 4" OAL 2-FLUTE CARBIDE END MILL, 2 PCS (186718733580)
.156" X .40" LOC X 4" OAL, 1/4" SHANK, 3-FLUTE CARBIDE END MILL (186750578001)
5/16" X .80" LOC X 2.5"OL 4-FL CARBIDE RH HAND CUT / LH SPIRAL END MILL (186646490400)
BASSETT 1/8" X 90° 2-FLUTE CARBIDE CHAMFER MILL, 4 PCS (186718695501)
GARR 1/4" X 1.4" LOC X 4" OAL , 1/4" SHANK, 2-FLUTE CARBIDE END MILL (186739549543)
5/8" DIA. X 1-1/2" LOC X 7-1/8" OAL X 5/8" SHANK, HSS TiCN 3-FLUTE END MILL (186718750561)
27293-C3 .093" X 1/4" LOC X 1.5" OAL , 1/8" SHANK, 4-FLUTE CARBIDE END MILL (186738482103)
GARR 1/8" X .300" LOC X 4" OAL , 1/4" SHANK, 3-FLUTE CARBIDE END MILL (186739539584)
GW .330" X .750" LOC X 5.4" OAL, 3/8" SHANK, 3-FLUTE CARBIDE END MILL (186707717272)
GW 1/4" X 1-1/2" LOC X 3/8" SHANK 3-FLUTE EXTENDED REACH CARBIDE B.N. END MILL (186618899340)
GW 5/32" (.156) 3-FLUTE EXTENDED REACH CARBIDE END MILL, CENTER CUT (186618885235)
GUHRING WN 3142 R-N 3,0-3,8 3MM X 3,8 MM LOC CARBIDE END MILL, 10 PCS (186718635023)
.75" X .20" LOC X 5" OAL X 3/4" SHANK, 6-FLUTE CARBIDE KEYSEAT MILLING CUTTER (186651644734)
.142" DIA. X .2" LOC X 6" OAL X 1/4" SHANK, CARBIDE 4-FLUTE SQ. END MILL (186630836141)
3.5MM .137" X 5/16" LOC X 2-1/4" OAL,6MM SHANK 2-FLUTE CARBIDE END MILL, 4 Pcs (186724663902)
.302" DIA. X 7/8" LOC X 3-1/2"OAL, 118° CARBIDE DRILL (186637768720)
1/4" X .750" LOC X 2.5" OAL , 1/4" SHANK, 4-FLUTE CARBIDE END MILL, 2 PCS (186738495919)
M.A.FORD 1/2" X 1" LOC X 3" OAL, 1/2" SHANK 4-FLUTE CARBIDE END MILL (186706566613)
3/16" X 5/16" LOC X 2" OAL , 3/16" SHANK, 5-FLUTE CARBIDE BALL END MILL, 2 PCS (186738493404)
PCT 1/4" X 1" LOC X 1/2" SHANK X 6" OAL BALL NOSE CARBIDE END MILL (185802669859)
.900" X .550" LOC X 4" OAL X 1" SHANK, 6-FLUTE CARBIDE T-SLOT MILLING CUTTER (186652915569)
NIAGARA 5/32 X 3/16 X 9/16 X 2 3-FLUTE CARBIDE END MILL, 5 PCS (186717523569)
GARR 3/16" X .850" LOC X 4" OAL, .030" CORNER RADIUS 3-FLUTE CARBIDE END MILL (186750538501)
PCT 3/4" X 1.5" LOC X 3/4" SHANK X 4" OAL, .467" NECK DIA. CARBIDE END MILL (185802707280)
3/16 X 3/16 X 9/16 X 2 3-FLUTE CARBIDE END MILL, DIFFERENT COATING , 5 PCS (186717532320)
1/2" X 1.4" LOC X 6"OL, 55° POINT ANGLE, 2-FL CARBIDE CHAMFER / CNTSNK. MILL (186663906083)
AB .125" W X 1.75" DIA. X 5/8" SHK 8-FL CARBIDE TIPPED SLOTTING CUTTER, (186595940104)
AB .125" WIDTH X 1.75" DIA. X 1/2" SHK X 4" OAL CARBIDE TIPPED 8-FL SLOTTER (186594697772)
OSG .125" R X 8° X 1" LOC 2FL CARBIDE ENDMILL, 1/2" SHANK, 5" OAL (185783692951)
HARVEY 46855-C6 .055" X .156" X 1.5" OAL CARBIDE 3-FLUTE END MILL, 6 PCS (186720276854)
SWIFT-CARB. 3/4" X 4" LOC X 6.5" OAL .125" R 2-FLUTE CARBIDE END MILL (186598701717)
1" X 2" LOC X 4.5" OAL X 1" SHANK, 6-FLUTE CARBIDE END MILL , TiALN COATED (186651617973)
LOVEJOY 3/4" CONVEX ROUND RADIUS CUTTER, 6FC 4212270-1 DET. 1 , 1" SHANK (186594721600)
AB .125" WIDTH X 2.375" DIA. X 1/2" SHK X 4" OAL CARBIDE TIPPED 8-FL SLOTTER (186594598204)
3/4" X 1" LOC X 9.5" OAL X 1/2" SHANK, 3-FLUTE CARBIDE END MILL (186648424342)
.740" X .950" LOC X 9.5" OAL X 1/2" SHANK, 4-FLUTE CARBIDE END MILL (186648433629)
MINICUT 3/4" 4-FL CARBIDE END MILL, CENTER CUT (185600760931)
CALIFORNIA 2.250" X 1.250" LOC X 1.250" SHANK .180R CARBIDE COOLANT END MILL (185784156734)
activate whohou store embed ebay listings into website

Whohou Marketplace | Terms of Use | Privacy Policy | Contact Us | Follow us on Facebook, Instagram, and Twitter | Affiliate Program | Affiliate Portal