5/16" (.312) X 7/8 (.875) Loc X 2-1/2 Oal, 4fl Carbide Ball End Mill

5/16" (.312) X 7/8 (.875) Loc X 2-1/2 Oal, 4fl Carbide Ball End Mill

Sold by inlinetool909

This seller has received 315 ratings (100.00% Positive)

Buy now for $26.00 USD

 

Item ships from Fontana CA USA

Browse all: End Mills Accessories, Extensions & Storage

Similar Items

5/16" / .312" x 3/4" LOC x 2-1/2" OAL Carbide End Mill 4 Flute Fullerton Tool
Colton Carbide End Mill 3 Flute Square 5/16" DIA x 7/8" LOC x 2-1/2" OAL
Colton Carbide End Mill 2 Flute Ball 5/16" DIA x 7/8" LOC x 2-1/2" OAL
Colton Carbide End Mill 4 Flute Square Coated 5/16" DIA x 7/8" LOC x 2-1/2" OAL
Colton Carbide End Mill 4 Flute Ball Coated 3/16" DIA x 5/8" LOC x 2" OAL
Colton Carbide End Mill 4 Flute Ball Coated 5/16" DIA x 7/8" LOC x 2-1/2" OAL
5/32" solid carbide double sided ball end mill 5/16" LOC 2" OAL 4 flute
11/64" X 5/8” LOC 3/16” Shank Diam 2” OAL 4 Flute Altin Carbide Ball End Mill
Colton Carbide End Mill 2 Flute Ball Long 5/16" DIA x 1-1/8" LOC x 3" OAL
GARR 3/8" DIA. X 2" LOC X 3/8" SHK. X 6" OAL, 4-FL SOLID CARBIDE END MILL,
Colton Carbide End Mill 4 Flute Ball Long Coated 5/16" DIA x 1-1/8" LOC x 3" OAL
MELIN CARBIDE END MILL EDP # 311100 DIA 1/4" LOC 3/8" 4FL LBS 1-1/8 OAL 4" TiXCO
3/8" 3 Flute Carbide 5/16" Shank x 1/2" LOC x 3-3/4" OAL End Mill TiSiN Coated
3 NEW HTC TOOL CO. 3/16" X 3/16" X 5/8" LOC X 2" OAL 4 FL CARBIDE END MILL USA
Colton Carbide End Mill 2 Flute Square 5/16" DIA x 7/8" LOC x 2-1/2" OAL
11/32X 7/8 FL X 2-1/2 OAL 4 FL SE BALL CARBIDE END MILL (GARR TOOL)
Colton Carbide End Mill 2 Flute Ball 3/16" DIA x 5/8" LOC x 2" OAL
NEW FULLERTON USA 5/16" CUT X 7/8" LOC X 2 1/2" OAL 4 FL SQ. END C.C. CARBIDE EM
Guhring Carbide Ball End Mill 1/4" diameter, 3/4"LOC, 2-1/2"OAL, 4FL
NEW PUTNAM END MILL 7/8"DIA 1-1/2"LOC 2FL 5/8”SHANK 4-1/16 OAL sq. end

More from inlinetool909

activate whohou store embed ebay listings into website
1/2" Regrind to .492" x 3/4" LOC 2 Flute SGS Carbide End Mill, See Photos (266401363587)
1/2" Regrind to .494" x 7/8" LOC 2 Flute SGS Carbide End Mill, See Photos (266401356999)
QUINCO 1/4" x 1-1/2" LOC x 3/8" Shank 2FL Long HSS End Mill 3-1/4" OAL (266485750622)
Kennametal 1/4" 4 Flute (.045 R) Carbide Endmill 1/4" Shank CRHEC250S4R45 KC635M (266218046880)
1/4 Endmill 1" LOC x 3/8 Shank 2-13/16 OAL 2 Flute Hss, PCT Cutter (266250327162)
1/4 Endmill 1-3/4" LOC x 3/8 Shank 3-5/8 OAL 2 Flute Hss, PCT Cutter (266250342334)
PCT 54108 1/2"x1/2"x1-1/4" 3-1/4" OAL 4 FL M42 BALL ENDMILL (266185510268)
PCT 54504 5/16" (.312) x3/8"x2" LOC x 3-3/4" OAL 4 FL M42 HsCo BALL ENDMILL (266185519971)
NIAGARA 1/4"x 1/2 LOC 3" OAL (.015 Radius) CARBIDE END MILL Coated (266214010439)
PCT 44D04 1/4" (.250) x3/8"x5/8" LOC x 3-7/16" OAL 4 FL M42 Double End, ENDMILL (266185724637)
PCT 54404 1/4" (.250) x3/8"x1-3/4" LOC x 3-9/16" OAL 4 FL M42 HsCo BALL ENDMILL (266185638526)
5/16" / .3125 4 Flute Carbide Endmill 5/16" Shank New Fullerton (266681078961)
1/4 / .250"x 3/4 LOC x 2-1/2 OAL AlTiN .045 Radius Carbide Endmill New YG-1 (266480711286)
.356" Regrind 7/8" LOC x 3/8" 2 Flute Carbide End Mill 3-3/4" OAL (266270148330)
1/2" 4 Flute Carbide Ball Nose End Mill with Flat Grind New Fullerton Tool (266506472941)
19/64" / .2969" x 7/8 LOC 4 Flute Carbide Endmill 5/16 Shank TIAlN New Fullerton (266613807053)
5/16" / .312" x 3/4" LOC x 2-1/2" OAL Carbide End Mill 4 Flute Fullerton Tool (266504284052)
B-200-600 x 1/4" Shank .600 Max DOC Solid Carbide Boring Bar New Internal Tool (266677830919)
New, 1/4" (.250) x 3/4 LOC x 2-1/2 OAL, **.020 Radius** CARBIDE END MILL (266229046499)
New, 1/4" (.250) x 3/4 LOC x 2-1/2 OAL, CARBIDE BALL END MILL (266229020299)
1/4" / .250 X 3/4 LOC x .030 Radius, 4 Flute, ALTIN, Carbide Endmill New Garr (266504286184)
.735" by .736"x 3/4" x 5-1/2" OAL Double End 4-Flute Cobalt End Mill (266623693516)
.725" by .726"x 3/4" x 5-1/2" OAL Double End 4-Flute Cobalt End Mill (266623700485)
3/16" / .1875 x 5/8 LOC x 2" OAL .015 Radius 4Flute TiCN Design Rite XL New (266466305283)
Melin 3/8" x 5/8" LOC 3 Flute Carbide Ball Nose End Mill EMGS-1212-B USA (266484051071)
.494" Regrind x 1" LOC x 3" OAL, 1/2 Carbide End Mill 4 Flute Flat Grind (266269934809)
3/16 / .187" x 5/8 LOC x 2" OAL AlTiN .030 Radius Carbide Endmill New YG-1 (266480709111)
7/64 / .1094 4 Flute End Mill .030 Corner Radius 1/8 Shank, Fullerton - 3 Pack (266372909517)
.306" Regrind x 3/4" LOC x 2-1/2" OAL, 5/16 Carbide End Mill 4 Flute Flat Grind (266272891264)
1/4" / .250" x .5/8" LOC 4 Flute Carbide Mill Fullerton Tool (266325675659)
.296" / 19/64" Regrind x 7/8" LOC x 2-1/2" OAL, 5/16 Carbide End Mill 4 Flute (266272904464)
.1250" 1/8" BALL END MILL 1/8" x 1/8" x 1" x 3" 4 Flute Carbide (266255478997)
6-32 TPI UN .218 LOC 3 Flute Carbide Thread Mill 1/8" Shank Harvey Tool AlTIN (266337994165)
1” x 1-1/2” LOC x 4” OAL .030 Rad. 4-Flute End Mill TIAlN New Fullerton Tool (266557641466)
7/8" x 5" LOC, 7/8" Shank, 7-1/4" OAL 3 Flute HSS Endmill, HANITA, Whistle Notch (266500706101)
30° x .010 Tip x 1/4" Shank Helical 4 Flute Chamfer AilTIN Coated, Harvey Tool (266352243240)
5/16" 4 Flute Carbide Endmill 5/16" Shank Straight Flute (266267570938)
3/8" x 1" LOC 2 Flute Carbide Ball End Mill 2-1/2" OAL Fullerton Tool (266262815056)
3/8" x 1" LOC 4 Flute Carbide Endmill 3/8" Shank 32017 Fullerton Tool (266262799004)
3/8" End Mill With .045 Radius 1" LOC 4 Flute Solid Carbide TiALN 2-1/2" OAL (266268826242)
1/2" x 2" LOC x 4" OAL, 3 FLUTE, COBALT END MILL, PCT CUTTERS (266175847801)
3/4" Regrind to .738" x 2-1/4" LOC, 2 Flute Carbide Endmill 3/4" Shank (266267283346)
HANITA 3/4 X 3/4 X 1-5/8 X 3.7/8 OAL 3 FLUTE, LEFT HAND END MILL (266175553780)
HANITA 3/4 X 1-5/8 LOC X 3.7/8 OAL 4 FLUTE, RH Cobalt, Roughing, END MILL (266175638625)
.187" Carbide Endmill .030 Radius, 4 Flute 3/16 x 5/8 LOC x 2" OAL New YG-1 (266599661991)
OSG 5808200 M4.5 x 11mm x 3/8 shank 2fl HSS End Mill (266184164997)
NEW IMCO ACCELERATOR CARBIDE 1/32 (.0313) END MILLS SHARP CORNER 34402 (266195149362)
New IMCO .1562" 5/32" 4 FLUTE DOUBLE END STUB LENGTH CARBIDE END MILL (266233031342)
1/4" x 3/4 LOC, 2 Flute Ball End Mill, New SGS 30332 (266355533298)
HANITA 3/8" x 3/4" LOC x 2-1/2" OAL, 4 Flute, Cobalt Roughing Endmill, TICN (266175627408)
3/8" x 3/4" LOC x 2-1/2" OAL 4 Flute Hss, End Mill New PCT Cutter (266262635632)
1/4" 4 Flute Carbide Endmill 1/4" Shank Straight Flute (266261304914)
.623" Regrind x 1/2" LOC x 3-1/2" OAL 5/8 Carbide End Mill 4 Flute Kennametal (266681067470)
New, 1/4" (.250) x 3/4 LOC x 2-1/2 OAL, **.020 Radius** TiAlN CARBIDE END MILL (266229054761)
New, 1/4" (.250) x 3/4 LOC x 2-1/2 OAL, TiAlN COATED CARBIDE BALL END MILL (266228990552)
Garr 1/4" x 1" x 3", 4 Flute Carbide Ball Endmill 1/4" Shank 730MA, ALTIN (266172773970)
Fullerton Tool Ball End Mill 1/4 x 3/4 x 2-1/2, 4 Flute, ALTIN, Harmon-i-cut (266173007160)
Nachi 11/16" (.6875) x 1-3/8 LOC x 5/8" Shk Cobalt 2 Flute End Endmill (266192188491)
.490" Regrind x 2" LOC x 3-7/8" OAL 5 Flute Carbide End Mill 1/2" Shank Read (266974322731)
Garr Tools End Mill 1/4 X 2-1/2” .010 Radius, 4 Flute, 3/4” LOC, ALTIN, #80097 (266172702184)
Ultra Tool 15/64 (.234) x 3/4 LOC X 2-1/2 OAL, 4 Flute Ball End Mill, Uncoated (266171295301)
Ultra Tool 1/8 x 1/2 LOC X 1-1/2 OAL x .030 Rad. 4 Flute, End Mill, Uncoated (266171459055)
5/16" (.312) x .625 LOC X 2-1/2 OAL, .030 Radius, 4FL CARBIDE END MILL (266172791806)
3/8" 4FL Ball END MILL 3/8 x 1" x 2-1/2" FULLERTON TOOL, TIALN, Harmon-i-cut (266172807069)
SGS Tool 30156 SER 1B 7/16 Ball End Mill 4 Flute, Single End, 2-7/8 OAL. (266174138356)
1/2" x 3" LOC x 6" Carbide 4 Flute Ball End Mill New Design-Rite XL (266815061126)
HANITA 3/8 x 1-1/2 LOC x 3-1/4 OAL, Cobalt Ball End Mill, TICN COATED (266175816695)
1/2" x 3" LOC x 6" Carbide 4 Flute Ball End Mill AlTiN New Design Rite XL (266815073652)
3/4 x 3 x 2-1/4 LOC 4-1/2 OAL HsCo End Mill 4FL SE Ball New Niagara (266619047664)
M.A. FORD 1/32" / .0310 Tuffcut Dm 2 Flute Ball Nose End Mill Necked, New (266474265883)
HANITA 1/2" x 1/2 x 2" LOC x 4" OAL, 4 Flute, Cobalt Endmill (whistle notch) (266175824114)
1/4" x 4" OAL 4FL SE X-Long Length TiAlN Carbide End Mill New Fullerton Tool (266504289952)
3/8"x 3/8 LOC x 5-3/4 OAL, .130 RAD, 3 FL 3.5"REDUCED NECK, LONG CARBIDE ENDMILL (266235876201)
NEW 1/2 x 1 LOC x 4-1/2 OAL Carbide 6 Flute End Mill .060 Radius (266235847132)
3/8" 4 Flute Carbide Endmill 3/8" Shank Straight Flute (266261295070)
1/2" x 2" LOC x 4" OAL 3 Flute Hss, New PCT Cutter (266262592977)
5mm / .1968" x 3/8 DOC 2FL Single End HssCo Ball Endmill TiCN 3-1/2" OAL New OSG (266685254055)
HANITA 1/2" x 2" LOC x 4" OAL, 4 Flute, Cobalt Roughing Endmill, TICN COATED (266175595042)
HANITA 1/2" x 1/2 x 2" LOC x 4" OAL, 4 Flute, Cobalt Endmill, Square End (266175573289)
PCT CUTTER 5/8" x 2- 1/2" LOC x 4-5/8" OAL, 3 Flute COBALT, Endmill, Square End (266175662665)
Design Rite XL, Ball End Mill 5/16" X 3/4 LOC, 4FL AlTiN 2-1/2" OAL D6641314 (266171124751)
#22 / .1570 x 1" LOC Carbide Drill SER 101 DRILL 51022 New SGS Tool (266719564030)
Kennametal 1" 4 Flute Coolant Thru Endmill 1" Shank M1D100E1004W100L125 (266192440481)
Hanita (3023) 7/8 x 7/8 x 5"x 7-1/4" OAL HSS 3-Flute Endmill with whistle notch (266181402124)
activate whohou store embed ebay listings into website

Whohou Marketplace | Terms of Use | Privacy Policy | Contact Us | Follow us on Facebook, Instagram, and Twitter | Affiliate Program | Affiliate Portal